Description

Fiber Tech Re-Pel

Carpet & Upholstery Protector

Fiber Tech Re-Pel is the latest technology in short chain fluorochemicals and the latest generation of dye blocking with acid dye resistors. Re-Pel provides superior performance in stain resistance to many long-chain fluorochemical protectors on the market. This protector will provide water and oil based resistance as well as giving superior stain prevention. Re-Pel covers up to 5600 sq. ft. per concentrate.

APPLICATION:

Low Pressure Sprayer Application –

  1. Dilute by mixing 1 part Re-Pel to 6 parts water.
  2. Apply with #8004 jet nozzle at a rate of 400 to 800 square feet to one gallon at 35-45 PSI. The coverage will depend on pile and density of carpet fibers. Low pile commercial carpet 800 square feet per diluted gallon where heavy pile residential carpet requires 400 square per gallon.
  3. Apply evenly over entire carpet surface making sure to overlap, then rack or brush, fully working protector into carpet fiber.
  4. To prevent material accumulation in spray equipment, clean after each use with fresh water.

In-Line Sprayer Application for Truckmounts –

  1. If using injection sprayer simply set your adjustment nozzle to  and the sprayer will automatically dilute at 1;6 rate, no mixing necessary. For Non-Revolution Injection Sprayer, make sure you replace metering tip with 1:6 tip and the sprayer will automatically dilute at that ratio, no mixing required.
  2. Reduce pressure at truckmount outlet to 300 PSI. The coverage will depend on pile and density of carpet fibers. Low pile commercial carpet 800 square feet per diluted gallon where heavy commercial carpet 800 square feet per diluted gallon where heavy.
  3. Apply evenly over entire carpet surface making sure to overlap, then rack or brush, full working protector into carpet fiber.
  4. To prevent material accumulation in spray equipment, clean after each use with fresh water.