Description

Fiber Tech Descale-It Coil Cleaner

Fiber Tech Descale-It Coil Cleaner is specially designed for use in truckmounted carpet cleaning extractors. It is used to remove hard water build up and chemical deposits from heat exchangers. Regular use of DeScale-It will help keep your system running smoothly by preventing heat loss and plugged heat exchangers.

DIRECTIONS FOR USE:

Use full strength, do not dilute.

Circulate DeScale-It through the heat exchanger system for 15 minutes. If circulation is not possible, then allow DeScale-It to stand in the heat exchanger system for 15 minutes. After flush, rinse system with clean water and dispose of the product in an appropriate receptacle.

For best results, this procedure should be repeated every 50-100 hours of unit operation depending on water conditions in your area. In some individual truckmount systems it may be necessary to perform a flush more often or for longer periods than suggested in the directions.

DeScale-It can be used for more than one system flush. Simply store DeScale-It solution for the next time a system flush is required. Effectiveness will diminish with the number of times used.

NOTE: Do not mix Fiber Tech DeScale-It with any other chemical product.

Shop more Fiber Tech products here.